National Hardware N266-106 4062BC Solid Flat in Plain Steel,3 x 48

The National Hardware N301-374 4062BC Solid Flat in Plain Steel is a versatile piece of flat stock that is well-suited for various projects. It is made of solid steel and measures 3 inches by 36 inches. Customers have found this product to be of high quality and have reported no issues with its performance. One customer even used it as center stops for barn doors, finding it to be a cheaper and less noticeable alternative to screws. Another customer used it to extend their truck bumper lower skid plate and found that it met their expectations. The flat stock is described as being of good quality, with tolerance held true throughout the product. It is also noted that the piece received by one customer appeared to be stainless steel, which was not an issue for them. However, there is some confusion regarding the thickness of the flat stock. In response to a question about its thickness, one customer confirmed that it is 3/16 inches thick. However, another customer asked for a 1/4-inch thick option, to which it was confirmed that this product is only 1/16 inches thick. In terms of versatility, one customer inquired about using the flat stock as a steel panel for hanging magnets on their wall. While the size of this product may not be ideal for that purpose, it was suggested that a sheet of 16 to 18 gauge steel or even 22 to 24 gauge steel would be more suitable. Overall, the National Hardware N301-374 4062BC Solid Flat in Plain Steel is a well-received and versatile product that fulfills its intended purpose for customers.